Lug Nut Size And Type Guide (Chart With Most Manufacturers) (2024)

FAQs

What lug nut size is the most common? ›

The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

Found on passenger cars, SUVs and small pickups, rims with a five-lug pattern are the most common. And why does your wheel lug pattern matter to you? Great question! Knowing your bolt pattern is critical because it's how your wheels are secured to your vehicle using lug nuts/lug bolts.

Most common commercial lug nut size, the 33mm is used for most medium and heavy duty trucks. Compare to 1-5/16” A secondary light truck lug nut size. Compare to 13/16” Most common light truck lug nut size.

5-lug patterns consist of the following: 5×98, 5×100, 5×108, 5×110, 5×112, 5×114.3, 5×115, 5×120, 5×120.7, 5×127, 5×130, 5×135, 5×139.7, 5×150, 5×155, 5×165.1 and 5×205.

The most common lug width is 20 mm, but they can range from 16 mm to 24 mm. Some vintage- or ladies watches have even smaller lug widths. When you want to buy one of our watch bands you need to know, which strap size you should select for your watch. Your watch can look bad with a too small or too big watch strap.

Lug Nut Sizes

Metric thread pitch indicates the distance (in millimeters) between each thread. So a lug nut size of M14x2. 0 indicates that the diameter of the stud is 14 mm and the distance between each thread is 2 mm.

Different sizes and bolt patterns exist across various models that Chevy has released in the past. The most common Chevy 6-lug bolt pattern that you'll find on the highest number of vehicles on Modesto roads, is the 5-127 metric. Between 1973 and 1998, this was the lug used on most Chevy full-size truck models.

The most common 5 bolt pattern is 5 on 4-1/2. However, 5 bolt patterns also come 5 on 4-3/4, 5 on 5, and 5 on 5-1/2. It is important to know the bolt pattern before you buy new wheels to ensure a proper fit.

These huge spikes are usually decorative, meant to intimidate drivers.

What size are the lug nuts on a Ford truck? ›

What Size Are Ford F150 Lug Nuts? All F150 models from 2004-2025 use a 14mm x 1.5 or 14mm x 2.0 lug nut size. Here's a breakdown by model year: all 2004-2014 F150 – 14mm x 2.0 lug nuts, most 2015-2024 F150 – 14mm x 1.5 lug nuts.

Lug nuts often differ between domestic and import models as sizing varies between SAE and metric. As well, the vehicle type can make a difference for the sizing as larger cars, trucks, and SUVs tend to have larger diameter studs, thus bigger lug nuts.

2004-2008 Ford F-150 Lug Pattern: 6×5.31″ (6×135mm) 2009-2014 Ford F-150 Lug Pattern: 6×5.31″ (6×135mm) 2015-2020 Ford F-150 Lug Pattern: 6×5.31″ (6×135mm) 2021-Present Ford F-150 Lug Pattern: 6×5.31″ (6×135mm)

In some cases, the Ford and Chevy 6-lug spacer is the same. For example, both Ford Ranger and Chevy Silverado use a 6×139.7mm bolt pattern. Therefore, you can put a Ranger wheel on a Silverado. The only thing that might cause an issue is the center bore or wheel offset.

IIRC, yes. The only difference was Chevy to Ford because ford was about 1/8 in larger diameter on the center (large ) hole. When Ford went to the current Super Duty design for the 1999 model year they changed their lug pattern a bit.

4) Socket Sizes

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

To safely install your wheels, it's important that the lug nut size matches your vehicle's requirements. If your lug nuts or lug bolts don't match your vehicle's thread pitch, they won't work on your ride. Lug nut sizes are given in two numbers.

Your owner's manual should tell you what size to get – alternatively, you can use a thread pitch gauge to find out. Whatever size or type of wheel bolts and nuts you need, Euro Car Parts can supply them.